I had a small fuel leak from my drain pipe and i thought the drain screw wasn't tight enough. But When i tightened it, fuel started streaming out even faster. It is screwed in a lot more than the other drain screw which leads me to believe that it was over tightened and something broke. i blocked the drain hose and nothing is leaking but i'd like to find a permanent solution. Do i need a whole new float bowl cover? I've looked but all i find is either gaskets or a whole new carb. Anyone have any ideas?
#1
Posted 17 May 2018 - 09:03 am
#2
Posted 17 May 2018 - 09:18 am
Put a post up in the wanted section as you'll be extremely lucky to find a float bowl for a mk1 for sale on ebay or the likes. It's easy to overtighten the screw which then cracks the float bowl, done it myself in the past, as have others on here. If it's not cracked then a new drain screw might work after you've given the drain hole a good clean.
Mk2a 2000 in Silver. Top end Refurb @ 41100 miles, Scottoiler, Renthal Road High Bars, Up & Back Bar Risers, Bellypan, DL650 Handguards, Capt. Picard Bar Ends, House of Henty SS Wheel spacers, New Seat Cover Fitted. 58 MPG !! Now owned by chrisbee ! Studley's mk2a Bloggerydoodaah ! Photos of my first MK1 Photos of my MK2a TPLQHCSRSFC No. 1 Fan
#3
Posted 17 May 2018 - 10:36 am
Put a post up in the wanted section as you'll be extremely lucky to find a float bowl for a mk1 for sale on ebay or the likes. It's easy to overtighten the screw which then cracks the float bowl, done it myself in the past, as have others on here. If it's not cracked then a new drain screw might work after you've given the drain hole a good clean.
You're right, I've done cracked it! Live and learn...
I'll put a post up, thanks!
#4
Posted 17 May 2018 - 12:34 pm
If you can't find one, might it be worth seeing if a friendly garage with a TIG welder could seal the crack up.
Not sure if that's possible, but might be worth looking into if replacements are scarce.
#5
Posted 17 May 2018 - 01:39 pm
The crack (fnarfnar) usually runs along the threaded part where the drain screw, screws (chorkle,chorkle) so I imagine it'd to be difficult to weld Nog. It's also pot metal shoite.
Mk2a 2000 in Silver. Top end Refurb @ 41100 miles, Scottoiler, Renthal Road High Bars, Up & Back Bar Risers, Bellypan, DL650 Handguards, Capt. Picard Bar Ends, House of Henty SS Wheel spacers, New Seat Cover Fitted. 58 MPG !! Now owned by chrisbee ! Studley's mk2a Bloggerydoodaah ! Photos of my first MK1 Photos of my MK2a TPLQHCSRSFC No. 1 Fan
#6
Posted 17 May 2018 - 02:54 pm
Fair enough, I just thought it might be a way out if possible.
Hope you find one then - might be worth looking for whole carbs too then, in case someone has a spares/repair that you could pinch the bowl off.
#7
Posted 17 May 2018 - 03:26 pm
If all fails - Magic Metal it.
Single-handedly reviving the Wave.
2008 reg. Black TDM 900 ABS
#8
Posted 17 May 2018 - 03:50 pm
Ebay had a bunch of carb separates for sale not so long ago, have a good search cos cant remember if it was UK or elsewhere in Europe, might still be up..
Bigred mk1 R1 Calipers- Braided lines- Givi wing rack-Crash bungs- Hi vis bullets-PR2's- and a hoot to ride.
Quad 900 Silver Laser duo tech pipes-Scott oiler-Engine crash bars- Radiator mounted see me ring LED's-Datatool system 3 alarm -Centre stand- Extender fender-Renthal bars-Handle bar risers-Mirror extenders-BMW GS Handgaurds-Acumen uprated horn & Nautilus-Stainless steel Radiator guard-Givi wing rack-OEM screen-Yammy touring screen-MRA Vario-MRA Double bubble cut down for fast as fk riding-Tiger screen-Tank protector-Stomp grip panels-Optimate lead Gone to Heaven
1991 MK1 in need of some TLC watch this space Sorted and on the Road Mick it's the bike that Jack built Gone to Heaven
Also tagged with one or more of these keywords: Carbs
Start your Engine →
All About TDM →
Mki Carburetor Problems (Help Needed!)Started by Mechengine , 27 Jun 2022 Carbs, Leaks |
|
||
Start your Engine →
All About TDM →
I'm Thinking Emulsion Tubes.....againStarted by Replicant , 20 Jun 2020 Carbs |
|
||
Start your Engine →
All About TDM →
Carbs And Fuel Pipe RoutingStarted by Jell , 15 Apr 2020 Carbs |
|
||
Market →
For Sale →
Carburettors Off A 1999/4TxStarted by danjohnston89 , 20 Oct 2019 Carbs |
|
||
Start your Engine →
All About TDM →
Carb Identification Tdm 850 - 4Tx?Started by Rockadam666 , 16 Jul 2019 Carbs, 4tx, TDM 850 |
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users