Jump to content


Photo

Tdm900 Rear Suspension Linkage Service


  • Please log in to reply
43 replies to this topic

#1 Riggers

Riggers

    Knight of Postsalot

  • Member
  • PipPipPipPipPip
  • 531 posts
  • Location:Hull - England
  • TDM model: 2009

Posted 17 October 2016 - 01:23 pm

Hi guys,

 

I thought it's about time I overhauled the rear linkage on my 900. I'm sure somewhere on the forum is a step by step guide to the job, together with a few tips at removing that pesky blind ended frame mount bearing.

 

Snag is I can't for the life of me find it despite all sorts of searches.

 

Any chance anyone can put the 'link' up for me (assuming it's still around somewhere).

 

Many thanks all.

 

Riggers.



#2 dablik

dablik

    Master Intermediate Fettlin' Award 2018

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 10,817 posts
  • Location:Bootleshire
  • TDM model: 1992

Posted 17 October 2016 - 03:18 pm

Here's one of em Riggers 


Bigred mk1 R1 Calipers- Braided lines- Givi wing rack-Crash bungs- Hi vis bullets-PR2's- and a hoot to ride.

Quad 900 Silver Laser duo tech pipes-Scott oiler-Engine crash bars- Radiator mounted see me ring LED's-Datatool system 3 alarm -Centre stand- Extender fender-Renthal bars-Handle bar risers-Mirror extenders-BMW GS Handgaurds-Acumen uprated horn & Nautilus-Stainless steel Radiator guard-Givi wing rack-OEM screen-Yammy touring screen-MRA Vario-MRA Double bubble cut down for fast as fk riding-Tiger screen-Tank protector-Stomp grip panels-Optimate lead   Gone to Heaven  :sorry: 

 

1991 MK1 in need of some TLC watch this space   :) Sorted and on the Road Mick  :P  :P it's the bike that Jack built  ;) Gone to Heaven  :wub: 

 


#3 Riggers

Riggers

    Knight of Postsalot

  • Member
  • PipPipPipPipPip
  • 531 posts
  • Location:Hull - England
  • TDM model: 2009

Posted 17 October 2016 - 04:22 pm

Here's one of em Riggers 

Thanks dablik. I'm sure someone posted up showing how you can use a wall bolt to remove the said pesky bearing. :-)



#4 Studley Ramrod

Studley Ramrod

    Monkey Boys Monkey

  • Root Admin(A)
  • PipPipPipPipPipPipPipPip
  • 19,268 posts
  • Location:HELLO ! I'm in the Library...Notts
  • TDM model: 1993

Posted 17 October 2016 - 04:29 pm

Said linkydink shows pics of using a rawlbolt to remove the bush.  A few pages on from 1st post.

 

http://www.carpe-tdm...=30735&p=308017

 

And anudder wan.

 

http://www.carpe-tdm...=29452&p=291710


Mk2a 2000 in Silver. Top end Refurb @ 41100 miles, Scottoiler, Renthal Road High Bars, Up & Back Bar Risers, Bellypan, DL650 Handguards, Capt. Picard Bar Ends, House of Henty SS Wheel spacers, New Seat Cover Fitted. 58 MPG !!  Now owned by chrisbee !   Studley's mk2a Bloggerydoodaah !  Photos of my first MK1  Photos of my MK2a  TPLQHCSRSFC No. 1 Fan


#5 Riggers

Riggers

    Knight of Postsalot

  • Member
  • PipPipPipPipPip
  • 531 posts
  • Location:Hull - England
  • TDM model: 2009

Posted 17 October 2016 - 05:06 pm

Said linkydink shows pics of using a rawlbolt to remove the bush.  A few pages on from 1st post.

 

http://www.carpe-tdm...=30735&p=308017

 

And anudder wan.

 

http://www.carpe-tdm...=29452&p=291710

 

 

Thanks mate. Spot on!



#6 Riggers

Riggers

    Knight of Postsalot

  • Member
  • PipPipPipPipPip
  • 531 posts
  • Location:Hull - England
  • TDM model: 2009

Posted 25 October 2016 - 02:35 pm


Attached File  IMG_36161.JPG   102.64KB   2 downloadsHi again guys. Well I'm in the middle of the removing the 'pesky pin' from the rear suspension linkage. All my reading on the subject suggests an M6 rawl bolt for the job but as the pic shows it seems too larger diameter by maybe one or even two mm.

 

Have I missed something here or have I fallen into a trap known to all except me? :-( 

 

Any ideas guys?

 

This is what I bought...

 

 

 

 

Attached Files


Edited by Riggers, 25 October 2016 - 03:40 pm.


#7 steve27bha

steve27bha

    needs a 2nd hobby

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPip
  • 788 posts
  • Location:West Lothian
  • TDM model: 2008

Posted 26 October 2016 - 02:21 pm

In post #14 of the second link given by Studley I commented that one needs the tubular version of the Rawlbolt, not the cast one. There is even a pic of what I used.

TDM900A 2008/09 in use, with     gallery_179098_391_770.jpg sml_gallery_179098_391_1145.jpg  gallery_179098_391_1206.jpg gallery_179098_391_253.jpg gallery_179098_391_82.jpg gallery_179098_391_725.gif gallery_179098_391_797.jpg gallery_179098_391_1396.jpg gallery_179098_391_501.jpg gallery_179098_391_316.jpg  gallery_179098_391_1768.jpg gallery_179098_391_106.jpggallery_179098_391_2170.jpg gallery_179098_391_1373.jpg

 

CBX750FE in reserve; Cagiva N90 125 now rebuilt & in use.


#8 Riggers

Riggers

    Knight of Postsalot

  • Member
  • PipPipPipPipPip
  • 531 posts
  • Location:Hull - England
  • TDM model: 2009

Posted 26 October 2016 - 04:02 pm

In post #14 of the second link given by Studley I commented that one needs the tubular version of the Rawlbolt, not the cast one. There is even a pic of what I used.

 

Yep thanks Steve on re-reading I noticed that, and managed to get hold of one today. Unfortunately I can't get it to grip the inside of the pin despite my best efforts. I'm now waiting for  another rawl bolt to arrive from e.bay and keeping my fingers crossed!

 

Thanks for your reply mate.



#9 tr7dan

tr7dan

    Carpe Regular

  • Member
  • Pip
  • 120 posts
  • TDM model: 2010

Posted 27 October 2016 - 11:51 am

 a bit more info....



#10 Riggers

Riggers

    Knight of Postsalot

  • Member
  • PipPipPipPipPip
  • 531 posts
  • Location:Hull - England
  • TDM model: 2009

Posted 27 October 2016 - 04:28 pm

 

Many thanks for that mate. I'll give your method a go as I can't get a standard rawl bolt to grip the inside of the pin.  :good:



#11 Riggers

Riggers

    Knight of Postsalot

  • Member
  • PipPipPipPipPip
  • 531 posts
  • Location:Hull - England
  • TDM model: 2009

Posted 28 October 2016 - 05:39 pm

With thanks to all on the forum who have contributed to this topic, by using a combination of everyone's methods I managed to get the rear suspension 'blind pin' removed. And a good thing I did too as it was just starting to corrode away merrily as it nested tightly in the frame lug.

 

I eventually got a suitable 10mm rawl bolt from B & Q, but couldn't get one long enough to use as a puller. So I tightened it up really well inside the pin and then applied some gentle heat to the left side lug (no need to heat the right hand side one as the pin doesn't enter it).

 

After getting the lug reasonably hot I used a screwdriver as a drift to tap the pin out from the right hand side of the bike. By using a screw driver I was able to carefully only tap the bolt of the rawl bolt and not the sleeve, and thus the more I tapped the tighter it became lodged inside the pin.

 

I kept up a combination of heat and tapping, heat and tapping, ever conscious of the horror stories of breaking off the frame lug, and eventually out it came.

 

The pin was a bit corroded, but by far the worst was the one at the top of the dog bones.

 

Here are a few pictures of the job in progress. 

 

 Attached File  IMG_36341.JPG   115.27KB   6 downloads

The pin starting to corrode.

 

Attached File  IMG_36351.JPG   83.81KB   6 downloads

The rawl bolt came out without trouble

 

Attached File  IMG_36391.JPG   123.85KB   4 downloads

The top dog bone bolt was the worst corroded.

 

Attached File  IMG_36421.JPG   110.34KB   12 downloads

The stupid design means the pin doesn't locate into the right hand lug at all!

 

Attached File  IMG_36451.JPG   81.03KB   8 downloads

Job done!


Edited by Riggers, 28 October 2016 - 05:42 pm.


#12 Catteeclan

Catteeclan

    full o shoite

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 2,487 posts
  • Location:Gorleston Norfolk
  • TDM model: 2002

Posted 28 October 2016 - 06:06 pm

:good: Well done. I'm sure this will assist others, prob inc me as I haven't done mine yet.


2002 TDM900 Yellow


#13 Studley Ramrod

Studley Ramrod

    Monkey Boys Monkey

  • Root Admin(A)
  • PipPipPipPipPipPipPipPip
  • 19,268 posts
  • Location:HELLO ! I'm in the Library...Notts
  • TDM model: 1993

Posted 28 October 2016 - 06:08 pm

Nice job Riggers. :good:


Mk2a 2000 in Silver. Top end Refurb @ 41100 miles, Scottoiler, Renthal Road High Bars, Up & Back Bar Risers, Bellypan, DL650 Handguards, Capt. Picard Bar Ends, House of Henty SS Wheel spacers, New Seat Cover Fitted. 58 MPG !!  Now owned by chrisbee !   Studley's mk2a Bloggerydoodaah !  Photos of my first MK1  Photos of my MK2a  TPLQHCSRSFC No. 1 Fan


#14 Latestarter

Latestarter

    Knight of Postsalot

  • Member
  • PipPipPipPipPip
  • 676 posts
  • Location:Wiltshire
  • TDM model: 2003

Posted 28 October 2016 - 06:51 pm

I know myself it's a pig of a job and I was just drinking coffee watching Mr Henty when he done mine earlier this year at his place

2003 TDM900 in Galaxy Blue with 32k on the clock

Scottolier, TDM Gel Saddle, Blue HEL Brake Line Upgrade Feeding Blue Spot Callipers. Air Intake Mod,

Oxford Heated Grips, Polisport Handguards, RM-G Crash bars & Centre Stand, Givi
Touring & Double Bubble Screens, Bar Risers, Renthal 755 Riser Bars,
Givi E22N Panniers & Top Box, Clear Indicator Lens Conversation, Clear LED Rear Light Conversion, Mirror Extenders, TDM Stainless Radiator Cover and Stainless Screen Screws, SP Performance Carbon Tri-Oval Cans,
HID Headlight Upgrade, DRL Spotlights and Still Spending But Dont Tell The Wife!!


#15 Riggers

Riggers

    Knight of Postsalot

  • Member
  • PipPipPipPipPip
  • 531 posts
  • Location:Hull - England
  • TDM model: 2009

Posted 28 October 2016 - 07:04 pm

I know myself it's a pig of a job and I was just drinking coffee watching Mr Henty when he done mine earlier this year at his place

 

Lucky you!  :)



#16 AliG

AliG

    has been here 4ever

  • Member
  • PipPipPipPipPipPipPipPip
  • 1,454 posts
  • Location:Galicia, Spain
  • TDM model: 2010

Posted 28 October 2016 - 08:29 pm

The trick now is that it has been done, to do once a year and it is literally a 20 minute to half an hour job. Do one bolt/sleeve at a time, coat liberally in moly grease and put back on..
Ali

2004 900 - Blue with lots of goodies

2012 900 - Still adding shiny bits. Was black, changed to white and now back to black again.

 


#17 dmmsta

dmmsta

    supporter of the "Anti-Dazzle" Club

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 3,627 posts
  • Location:Marden, Kent, UK.
  • TDM model: 2006

Posted 28 October 2016 - 08:39 pm

really should do mine now that there's photo's, and a large tin of Moly in the shed!


MY06 TDM 900 Blue over Silver 354906_45.png
-----
Fuel Pipes
Givi Top Box
Renthal 758's
Grip Puppies
MRA Bubble
Dip & Hi HIDs

To-Do:
LED DRLs
Loobman
Powercoat Wheels
Hand Guards

-----
MY04 TDM 900 Blue over Silver Parts Bin
MY02 TDM 900 Yellow over Black RIP
post-1-1150550733.gif...post-1-1150559830.gif...copilot_zpsgezqc0xz.jpg...hids.jpg...

#18 Riggers

Riggers

    Knight of Postsalot

  • Member
  • PipPipPipPipPip
  • 531 posts
  • Location:Hull - England
  • TDM model: 2009

Posted 29 October 2016 - 09:12 am

really should do mine now that there's photo's, and a large tin of Moly in the shed!

 

I think it would be a good idea if the moderator (dableb?) would pull all the different threads and piccies together and put them in Knowledge Base, as it's such an important maintenance task. Currently it's a bit hit and miss when trying to find all the contributions.

 

If a few agree I'll put a request in.........

 

Riggers.



#19 dmmsta

dmmsta

    supporter of the "Anti-Dazzle" Club

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 3,627 posts
  • Location:Marden, Kent, UK.
  • TDM model: 2006

Posted 29 October 2016 - 10:40 am

:good:


MY06 TDM 900 Blue over Silver 354906_45.png
-----
Fuel Pipes
Givi Top Box
Renthal 758's
Grip Puppies
MRA Bubble
Dip & Hi HIDs

To-Do:
LED DRLs
Loobman
Powercoat Wheels
Hand Guards

-----
MY04 TDM 900 Blue over Silver Parts Bin
MY02 TDM 900 Yellow over Black RIP
post-1-1150550733.gif...post-1-1150559830.gif...copilot_zpsgezqc0xz.jpg...hids.jpg...

#20 Studley Ramrod

Studley Ramrod

    Monkey Boys Monkey

  • Root Admin(A)
  • PipPipPipPipPipPipPipPip
  • 19,268 posts
  • Location:HELLO ! I'm in the Library...Notts
  • TDM model: 1993

Posted 29 October 2016 - 10:48 am

 

I think it would be a good idea if the moderator (dableb?) would pull all the different threads and piccies together and put them in Knowledge Base, as it's such an important maintenance task. Currently it's a bit hit and miss when trying to find all the contributions.

 

If a few agree I'll put a request in.........

 

Riggers.

 

I'm sure we could sort summat out. :good:   Might help us hard working admins if you could stick with the same topic instead of posting up a noo wan on the same subject, please. :)  Also makes finding contributions much easier.

 

Sorted now. :good:


Mk2a 2000 in Silver. Top end Refurb @ 41100 miles, Scottoiler, Renthal Road High Bars, Up & Back Bar Risers, Bellypan, DL650 Handguards, Capt. Picard Bar Ends, House of Henty SS Wheel spacers, New Seat Cover Fitted. 58 MPG !!  Now owned by chrisbee !   Studley's mk2a Bloggerydoodaah !  Photos of my first MK1  Photos of my MK2a  TPLQHCSRSFC No. 1 Fan



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users