Not done me plastic diping yet but will be doing tomorrow, i can only presume this time it was a short to the frame and not another dodgey coil.
Wet Weather Rough Running: Coils and Leads
Started by
dapleb
, Apr 03 2006 09:40 pm
116 replies to this topic
#81
LewisBlackburn
-
- Member
-
- 1,748 posts
has been here 4ever
- TDM model: no more
Posted 28 January 2012 - 08:33 pm
Mine unfortunately started doing it again yesterday in the torrential rain
Not done me plastic diping yet but will be doing tomorrow, i can only presume this time it was a short to the frame and not another dodgey coil.
Not done me plastic diping yet but will be doing tomorrow, i can only presume this time it was a short to the frame and not another dodgey coil.
#82
dapleb
-
- Root Admin(A)
-
- 18,199 posts
Monkey Boy
- Location:The home of morris dancin
- TDM model: 1990
Posted 28 January 2012 - 08:39 pm
New Magnecors fitted now Lewis? I hops so cous I am running out of ways of suggesting it. 
"Whats up", "Piston Broke", "Yeah me too...hic"
If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117
Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.
Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.
If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117
Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.
Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.
#83
wicklamulla
-
- Supporting Member(thanks)
-
- 12,211 posts
is it Jizzy Rascal time yet.....?
- Location:Parish of Cruwys (pronounced 'Cruise' just loike Tom) Morchard, Mid Devon.
- TDM model: 1999
Posted 29 January 2012 - 10:24 am
QUOTE(LewisBlackburn @ Sat 28th Jan 2012, 08:33 PM) <{POST_SNAPBACK}>
Mine unfortunately started doing it again yesterday in the torrential rain
Not done me plastic diping yet but will be doing tomorrow, i can only presume this time it was a short to the frame and not another dodgey coil.
Not done me plastic diping yet but will be doing tomorrow, i can only presume this time it was a short to the frame and not another dodgey coil.
Lew i dipped the coil as well as the 'aitch tea' lead, i would advise yew to dip the lead/coil assembly at least twice or tree toimes in order to get a noice fat coating. Then alls ya gotta do is expose the coils flat blade connector terminals by cutting away any excess plasti dip with a stanley blade/scalpel. I also made an effort to 'shroud' the plug/socket connectors once the coils were plugged in and ready to go in order to prevent rain water mist/spray affecting them. good luck and best wishes.
spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.
I loike tay and hang sangwiches !
www.kenhogantreeservices.co.uk
http://s33.photobuck...77/wickla/?sc=6
http://reg.imageshack.us/v_images.php
#84
LewisBlackburn
-
- Member
-
- 1,748 posts
has been here 4ever
- TDM model: no more
Posted 29 January 2012 - 09:00 pm
Well I didn't do it today as I Didn't have time
had a bit of an emergency so had to do some running around.
Not got any magnecors yet. The order form seems complicated enough !
had a bit of an emergency so had to do some running around.
Not got any magnecors yet. The order form seems complicated enough !
#85
wicklamulla
-
- Supporting Member(thanks)
-
- 12,211 posts
is it Jizzy Rascal time yet.....?
- Location:Parish of Cruwys (pronounced 'Cruise' just loike Tom) Morchard, Mid Devon.
- TDM model: 1999
Posted 29 January 2012 - 09:12 pm
QUOTE(LewisBlackburn @ Sun 29th Jan 2012, 09:00 PM) <{POST_SNAPBACK}>
Well I didn't do it today as I Didn't have time
had a bit of an emergency so had to do some running around.
Not got any magnecors yet. The order form seems complicated enough !
had a bit of an emergency so had to do some running around.
Not got any magnecors yet. The order form seems complicated enough !
what order form ?? i've ordered from dem tree times now and i simply order over the phone, easy peasy.
spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.
I loike tay and hang sangwiches !
www.kenhogantreeservices.co.uk
http://s33.photobuck...77/wickla/?sc=6
http://reg.imageshack.us/v_images.php
#86
LewisBlackburn
-
- Member
-
- 1,748 posts
has been here 4ever
- TDM model: no more
Posted 29 January 2012 - 09:16 pm
Dem order forms at the bottom of this page
http://www.magnecor..../customsets.htm
Have you ordered just lead? and how much is it?
http://www.magnecor..../customsets.htm
Have you ordered just lead? and how much is it?
#87
wicklamulla
-
- Supporting Member(thanks)
-
- 12,211 posts
is it Jizzy Rascal time yet.....?
- Location:Parish of Cruwys (pronounced 'Cruise' just loike Tom) Morchard, Mid Devon.
- TDM model: 1999
Posted 29 January 2012 - 09:33 pm
QUOTE(LewisBlackburn @ Sun 29th Jan 2012, 09:16 PM) <{POST_SNAPBACK}>
Dem order forms at the bottom of this page
http://www.magnecor..../customsets.htm
Have you ordered just lead? and how much is it?
http://www.magnecor..../customsets.htm
Have you ordered just lead? and how much is it?
FFS Lewis i ain't gonna hold ya hand and wipe ya ass too
just ring em up and ask for the desired length of standard silicone HT lead you tink you'll need, and they'll post it to ya and den ya can cut it to the desired length fer left and roight hand soide. It's cheap and very worth while.
spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.
I loike tay and hang sangwiches !
www.kenhogantreeservices.co.uk
http://s33.photobuck...77/wickla/?sc=6
http://reg.imageshack.us/v_images.php
#88
dablik
-
- Supporting Member(thanks)
-
- 10,817 posts
Master Intermediate Fettlin' Award 2018
- Location:Bootleshire
- TDM model: 1992
Posted 29 January 2012 - 11:15 pm
@ wicky
Bigred mk1 R1 Calipers- Braided lines- Givi wing rack-Crash bungs- Hi vis bullets-PR2's- and a hoot to ride.
Quad 900 Silver Laser duo tech pipes-Scott oiler-Engine crash bars- Radiator mounted see me ring LED's-Datatool system 3 alarm -Centre stand- Extender fender-Renthal bars-Handle bar risers-Mirror extenders-BMW GS Handgaurds-Acumen uprated horn & Nautilus-Stainless steel Radiator guard-Givi wing rack-OEM screen-Yammy touring screen-MRA Vario-MRA Double bubble cut down for fast as fk riding-Tiger screen-Tank protector-Stomp grip panels-Optimate lead Gone to Heaven 
1991 MK1 in need of some TLC watch this space Gone to Heaven 
Sorted and on the Road Mick 
it's the bike that Jack built 
#89
Rallyist
-
- Supporting Member(thanks)
-
- 3,258 posts
Gettin to be an 'Old Bugger'
- Location:Usually in a Hospital somewhere in the Birmingham area
- TDM model: 1993
Posted 30 January 2012 - 11:46 am
QUOTE(wicklamulla @ Sun 29th Jan 2012, 09:33 PM) <{POST_SNAPBACK}>
FFS Lewis i ain't gonna hold ya hand and wipe ya ass too just ring em up and ask for the desired length of standard silicone HT lead you tink you'll need, and they'll post it to ya and den ya can cut it to the desired length fer left and roight hand soide. It's cheap and very worth while.
just ring em up and ask for the desired length of standard silicone HT lead you tink you'll need, and they'll post it to ya and den ya can cut it to the desired length fer left and roight hand soide. It's cheap and very worth while.Think Lewis may need pampers
For a challenging summer try the
Round Britain Rally.....
1993 TDM 850 Mk1 ..... 2008 TDM 900 .... 1975, 1979, 1982, 1992 Goldwings, Scott, AJS, Triumph 5TA
#90
wicklamulla
-
- Supporting Member(thanks)
-
- 12,211 posts
is it Jizzy Rascal time yet.....?
- Location:Parish of Cruwys (pronounced 'Cruise' just loike Tom) Morchard, Mid Devon.
- TDM model: 1999
Posted 30 January 2012 - 06:24 pm
QUOTE(Rallyist @ Mon 30th Jan 2012, 11:46 AM) <{POST_SNAPBACK}>
Think Lewis may need pampers
he needs milking loike a bullock
spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.
I loike tay and hang sangwiches !
www.kenhogantreeservices.co.uk
http://s33.photobuck...77/wickla/?sc=6
http://reg.imageshack.us/v_images.php
#91
LewisBlackburn
-
- Member
-
- 1,748 posts
has been here 4ever
- TDM model: no more
Posted 30 January 2012 - 08:50 pm
Ok, thanks for your help
Edited by LewisBlackburn, 30 January 2012 - 08:51 pm.
#92
wicklamulla
-
- Supporting Member(thanks)
-
- 12,211 posts
is it Jizzy Rascal time yet.....?
- Location:Parish of Cruwys (pronounced 'Cruise' just loike Tom) Morchard, Mid Devon.
- TDM model: 1999
Posted 30 January 2012 - 09:33 pm
QUOTE(LewisBlackburn @ Mon 30th Jan 2012, 08:50 PM) <{POST_SNAPBACK}>
Ok, thanks for your help
Ok if eye were yew i'd order a couple of meters of the stuff den yule have enuf fer anudder boike if needs be.
spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.
I loike tay and hang sangwiches !
www.kenhogantreeservices.co.uk
http://s33.photobuck...77/wickla/?sc=6
http://reg.imageshack.us/v_images.php
#93
PJay
-
- Member
- 10 posts
discovering Carpe
- Location:Woodstock, Oxfordshire
- TDM model: 2007
Posted 21 December 2012 - 12:39 am
Mine started doing the same this week - riding every day in rain - looked closer and shorting on head - lifted ht leads up and problem gone for now. Going to do the tape fix this weekend to cure longer term. Yamaha engineers are you reading this forum - so many cheap fixes to make a great bike even better - free R&D here.
Pete
Pete
#94
dapleb
-
- Root Admin(A)
-
- 18,199 posts
Monkey Boy
- Location:The home of morris dancin
- TDM model: 1990
Posted 21 December 2012 - 08:05 am
Pjay,
Oid replace the leads and then (as an extra precaution if you feel its needed) tape. Just putting tape on leads that are already breaking down is a bandage rather than long term fix. The magnecor outer coating really is superior to the OEM stuff.
Cheers
nDuncan
Oid replace the leads and then (as an extra precaution if you feel its needed) tape. Just putting tape on leads that are already breaking down is a bandage rather than long term fix. The magnecor outer coating really is superior to the OEM stuff.
Cheers
nDuncan
"Whats up", "Piston Broke", "Yeah me too...hic"
If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117
Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.
Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.
If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117
Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.
Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.
#95
divvxj
-
- Member
-
- 1,296 posts
has been here 4ever
- Location:back in the garden
- TDM model: 2007
Posted 21 December 2012 - 12:49 pm
wot he saidPjay,
Oid replace the leads and then (as an extra precaution if you feel its needed) tape. Just putting tape on leads that are already breaking down is a bandage rather than long term fix. The magnecor outer coating really is superior to the OEM stuff.
Cheers
nDuncan
#96
dablik
-
- Supporting Member(thanks)
-
- 10,817 posts
Master Intermediate Fettlin' Award 2018
- Location:Bootleshire
- TDM model: 1992
Posted 21 December 2012 - 02:03 pm
I agree, got the T shirt, i would replace em...
Bigred mk1 R1 Calipers- Braided lines- Givi wing rack-Crash bungs- Hi vis bullets-PR2's- and a hoot to ride.
Quad 900 Silver Laser duo tech pipes-Scott oiler-Engine crash bars- Radiator mounted see me ring LED's-Datatool system 3 alarm -Centre stand- Extender fender-Renthal bars-Handle bar risers-Mirror extenders-BMW GS Handgaurds-Acumen uprated horn & Nautilus-Stainless steel Radiator guard-Givi wing rack-OEM screen-Yammy touring screen-MRA Vario-MRA Double bubble cut down for fast as fk riding-Tiger screen-Tank protector-Stomp grip panels-Optimate lead Gone to Heaven
1991 MK1 in need of some TLC watch this space Gone to Heaven Sorted and on the Road Mick it's the bike that Jack built
#97
dmmsta
-
- Supporting Member(thanks)
-
- 3,627 posts
supporter of the "Anti-Dazzle" Club
- Location:Marden, Kent, UK.
- TDM model: 2006
Posted 21 December 2012 - 03:55 pm
Defo agree...
I ended up wasting a reel of SA tape on old leads.
Get some of this (http://www.ebay.co.uk/itm/230847455491), and tape it up - mines held out longer than the coils did!!
I ended up wasting a reel of SA tape on old leads.
Get some of this (http://www.ebay.co.uk/itm/230847455491), and tape it up - mines held out longer than the coils did!!
MY06 TDM 900 Blue over Silver 
-----
Fuel Pipes
Givi Top Box
Renthal 758's
Grip Puppies
MRA Bubble
Dip & Hi HIDs
To-Do:
LED DRLs
Loobman
Powercoat Wheels
Hand Guards
-----
MY04 TDM 900 Blue over Silver Parts Bin
MY02 TDM 900 Yellow over Black RIP
......
...
...
-----
Fuel Pipes
Givi Top Box
Renthal 758's
Grip Puppies
MRA Bubble
Dip & Hi HIDs
To-Do:
LED DRLs
Loobman
Powercoat Wheels
Hand Guards
-----
............
#98
MarkyMark
-
- Member
-
- 981 posts
900 going for ... 1000cc?
- Location:Swindon (SN4)
- TDM model: 2003
Posted 22 December 2012 - 03:08 pm
Had issues with my Tenere in early December. Its OK left out in the rain, but parked it for a couple of nights in the freezing fog and it did not like that one bit. Also have problems when garaged if wife has tumble-drier going this weather. Dried with a hair-dryer, sprayed liberally with WD40 - started fist touch.
Now have issues with TDM. Doh! Still - been waiting for an excuse to put new spark plugs in. Mine are about 50-60K miles old.
Now have issues with TDM. Doh! Still - been waiting for an excuse to put new spark plugs in. Mine are about 50-60K miles old.
XT1200Z - Big and bouncy
GTR1400 - Chaufer the wife.
XT660Z - Fun and commute.
TDM900 - Yellow.
#99
wicklamulla
-
- Supporting Member(thanks)
-
- 12,211 posts
is it Jizzy Rascal time yet.....?
- Location:Parish of Cruwys (pronounced 'Cruise' just loike Tom) Morchard, Mid Devon.
- TDM model: 1999
Posted 23 December 2012 - 11:07 pm
noice ant n' dec reference by PK there !
spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.
I loike tay and hang sangwiches !
www.kenhogantreeservices.co.uk
http://s33.photobuck...77/wickla/?sc=6
http://reg.imageshack.us/v_images.php
#100
doboy
-
- Member
-
- 259 posts
Carpe groupie
- Location:notts
- TDM model: 2010
Posted 31 July 2013 - 02:30 pm
well mine got tested the other day ...mine is a new one & first time it rained it was terrible missing like hell ..so straight home & did the tape job ..not been out in the rain since ...till sunday on my way back from cmc classic jap bike day ...the heavens opened ...and... no problem it ran perfect ....it,ll do till someone comes up with a permenant fix ......
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
