Jump to content


Photo

Fork Oil Change On A 9er


  • Please log in to reply
68 replies to this topic

#41 fixitsan

fixitsan

    Carpe Citizen

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 4,761 posts
  • Location:West Lothian
  • TDM model: 2003

Posted 09 August 2019 - 07:00 pm

Are the fork seals rubber?
If so make sure you use proper red rubber grease.
Ordinary HMP grease with attack rubber and cause it to swell and cease to seal.
I had a rubber bush on my VFR swell by at least 25% because the previous owner greased it.
There are a lot of greases out there for specific purposes.

 

 

So if I put HMP grease on something it swells in size.

The Mrs says 'thanks for that !'


900 with better bits. Owes me nothing, Makes me smile


#42 TDM4ever

TDM4ever

    Carpe Addict

  • Member
  • PipPipPip
  • 302 posts
  • Location:The Funny Farm..
  • TDM model: 2010

Posted 10 August 2019 - 07:30 am

 

 

So if I put HMP grease on something it swells in size.

The Mrs says 'thanks for that !'

 

The receiving part swells as well, so......  ;)



#43 drumwrecker

drumwrecker

    Carpe junky

  • Member
  • PipPipPipPip
  • 440 posts
  • Location:Welwyn/Hatfield
  • TDM model: 2007

Posted 10 August 2019 - 03:28 pm

I can't believe it is so long since I sold my TDM and stopped postinghere.

 

It does have to be rubber so guess if it pleases your wife you won't be involved.

 

Seriously I have recently serviced the rear calliper of my VFR and a rubber guide had swollen by about 25% because of the wrong grease being used. There are different greases for so many uses. I have at least six different types of grease all for different applications.


1953 BSA Bantam, 1960 Ariel Arrow, 1948 Vincent Rapide, 1959 Matchless G11, AJS 250CSR, 1986 BMW K75s, Suzuki 1999 GS500E, 2002 Suzuki SV650, 1991 VFR750 FL, 2007 TDM900

#44 TKH

TKH

    full o shoite

  • Member
  • PipPipPipPipPipPipPipPip
  • 2,200 posts
  • Location:Preston, NW England
  • TDM model: 2008

Posted 11 August 2019 - 02:21 pm

I can't believe it is so long since I sold my TDM and stopped postinghere.

 

It does have to be rubber so guess if it pleases your wife you won't be involved.

 

Seriously I have recently serviced the rear calliper of my VFR and a rubber guide had swollen by about 25% because of the wrong grease being used. There are different greases for so many uses. I have at least six different types of grease all for different applications.

I have 5 types

Silicone

Lithium

Red stuff

Copper

An some LT stuff I'be had for years.



#45 drumwrecker

drumwrecker

    Carpe junky

  • Member
  • PipPipPipPip
  • 440 posts
  • Location:Welwyn/Hatfield
  • TDM model: 2007

Posted 12 August 2019 - 04:45 pm

There is also Alumslip as in copperslip grease for greasing bolts in aluminium. There is also grease for drum brake parts, very high melting point. In short it good to read up what the correct lubricant should be and what damage the wrong one can do.

I got a lot of this info from the VFR site.


1953 BSA Bantam, 1960 Ariel Arrow, 1948 Vincent Rapide, 1959 Matchless G11, AJS 250CSR, 1986 BMW K75s, Suzuki 1999 GS500E, 2002 Suzuki SV650, 1991 VFR750 FL, 2007 TDM900

#46 dapleb

dapleb

    Monkey Boy

  • Root Admin(A)
  • PipPipPipPipPipPipPipPip
  • 18,198 posts
  • Location:The home of morris dancin
  • TDM model: 1990

Posted 12 August 2019 - 05:12 pm

And marine grease/waterproof.
"Whats up", "Piston Broke", "Yeah me too...hic"

If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117

Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.

Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.

#47 Studley Ramrod

Studley Ramrod

    Monkey Boys Monkey

  • Root Admin(A)
  • PipPipPipPipPipPipPipPip
  • 19,270 posts
  • Location:HELLO ! I'm in the Library...Notts
  • TDM model: 1993

Posted 13 August 2019 - 09:08 am

The Yamaha service manuals are great for showing the correct grease/loob to use on specific parts. :)


Mk2a 2000 in Silver. Top end Refurb @ 41100 miles, Scottoiler, Renthal Road High Bars, Up & Back Bar Risers, Bellypan, DL650 Handguards, Capt. Picard Bar Ends, House of Henty SS Wheel spacers, New Seat Cover Fitted. 58 MPG !!  Now owned by chrisbee !   Studley's mk2a Bloggerydoodaah !  Photos of my first MK1  Photos of my MK2a  TPLQHCSRSFC No. 1 Fan


#48 drumwrecker

drumwrecker

    Carpe junky

  • Member
  • PipPipPipPip
  • 440 posts
  • Location:Welwyn/Hatfield
  • TDM model: 2007

Posted 13 August 2019 - 07:18 pm

And marine grease/waterproof.

 

Would that be OK for wheel bearings etc?


1953 BSA Bantam, 1960 Ariel Arrow, 1948 Vincent Rapide, 1959 Matchless G11, AJS 250CSR, 1986 BMW K75s, Suzuki 1999 GS500E, 2002 Suzuki SV650, 1991 VFR750 FL, 2007 TDM900

#49 dapleb

dapleb

    Monkey Boy

  • Root Admin(A)
  • PipPipPipPipPipPipPipPip
  • 18,198 posts
  • Location:The home of morris dancin
  • TDM model: 1990

Posted 13 August 2019 - 09:01 pm

I use this stuff a lot https://www.belray.c...erproof-grease/

Says for wheel bearings etc though I only use it for stinkages and exposed bits.
"Whats up", "Piston Broke", "Yeah me too...hic"

If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117

Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.

Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.

#50 drumwrecker

drumwrecker

    Carpe junky

  • Member
  • PipPipPipPip
  • 440 posts
  • Location:Welwyn/Hatfield
  • TDM model: 2007

Posted 14 August 2019 - 06:22 pm

Thanks Daplep. 

 

Did you mean linkages or have you been through some cow shit and not cleaned the bike?


1953 BSA Bantam, 1960 Ariel Arrow, 1948 Vincent Rapide, 1959 Matchless G11, AJS 250CSR, 1986 BMW K75s, Suzuki 1999 GS500E, 2002 Suzuki SV650, 1991 VFR750 FL, 2007 TDM900

#51 thong

thong

    enuff posts to fill a 50cc

  • Member
  • 52 posts
  • TDM model: 2008

Posted 01 December 2020 - 03:39 pm

not sure if anyone mentioned it

but just for reference according to the jbx site the 2004 onward models have a different oil capacity

 

2002-2003,

quantity 507cm3,

level  133mm

 

2004>

quantity 545cm3

level  127mm



#52 Sphere

Sphere

    really likes Carpe

  • Member
  • 81 posts
  • TDM model: 2003

Posted 16 December 2020 - 09:48 pm

Hi Guys. Great thread, really useful as I'll be doing a front end refresh over the Christmas break. Going to lube the steering head bearings while I'm at it.

 

What's the opinion on fork oil weight to use on my newly acquired '03 900?

 

I see some use 10wt as recommended others go for 15wt or a mix.

 

Not sure which way to go, and would appreciate some guidance before I go buy the oil.


The best thing about being old is we did all our stupid stuff before the Internet was invented, so there’s no proof.


#53 PICARD

PICARD

    has been here 4ever

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 1,760 posts
  • Location:Wirral / wherever I lay my hat!
  • TDM model: 2004

Posted 17 December 2020 - 07:06 am

Sphere.....very personal thing that, I found, depends on your build....errr...weight and riding style and probably a few other factors.

Personally, i've gone from 10wt to 15.....tried a mix (12.5) and gone back to 10 after being told at MoT that " your suspension setup is very hard"

So back to you!!      Good luck!


Lock onto my co-ordinates and beam me up !!

04 900 - 92 mk 1 - r 1150 rs - Z550 A1 - 2x bonnies - plastic slug -XL185 - ...not in that order !! (and one or two i don't want / dare to own up to !!)

#54 dapleb

dapleb

    Monkey Boy

  • Root Admin(A)
  • PipPipPipPipPipPipPipPip
  • 18,198 posts
  • Location:The home of morris dancin
  • TDM model: 1990

Posted 17 December 2020 - 07:17 am

"10w" pickled onion water is not 10w new oil. So maybe start with 10w and then adjust next time based on a baseline of new oil and not pickled onion water.
"Whats up", "Piston Broke", "Yeah me too...hic"

If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117

Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.

Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.

#55 Rallyist

Rallyist

    Gettin to be an 'Old Bugger'

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 3,258 posts
  • Location:Usually in a Hospital somewhere in the Birmingham area
  • TDM model: 1993

Posted 17 December 2020 - 10:05 am

ATF is ideal in my opinion


For a challenging summer try the

Round Britain Rally.....  




1993 TDM 850 Mk1 ..... 2008 TDM 900 ....  1975, 1979, 1982, 1992 Goldwings, Scott, AJS,  Triumph 5TA


#56 PICARD

PICARD

    has been here 4ever

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 1,760 posts
  • Location:Wirral / wherever I lay my hat!
  • TDM model: 2004

Posted 17 December 2020 - 01:14 pm

"10w" pickled onion water is not 10w new oil. So maybe start with 10w and then adjust next time based on a baseline of new oil and not pickled onion water.

As usual Dappers, cut straight to the chase with clear, logical, well thought through advice.
EDIT....no emojis available, but I am winking and smiling....

Edited by PICARD, 17 December 2020 - 01:16 pm.

Lock onto my co-ordinates and beam me up !!

04 900 - 92 mk 1 - r 1150 rs - Z550 A1 - 2x bonnies - plastic slug -XL185 - ...not in that order !! (and one or two i don't want / dare to own up to !!)

#57 dablik

dablik

    Master Intermediate Fettlin' Award 2018

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 10,817 posts
  • Location:Bootleshire
  • TDM model: 1992

Posted 17 December 2020 - 07:08 pm

Well this fat fook has stuck 5 weight in and so far so good, 300 miles (3vd )and last time on the 900 had the forks bottom out with 12.5 weight oil, I would follow daps advice..

Bigred mk1 R1 Calipers- Braided lines- Givi wing rack-Crash bungs- Hi vis bullets-PR2's- and a hoot to ride.

Quad 900 Silver Laser duo tech pipes-Scott oiler-Engine crash bars- Radiator mounted see me ring LED's-Datatool system 3 alarm -Centre stand- Extender fender-Renthal bars-Handle bar risers-Mirror extenders-BMW GS Handgaurds-Acumen uprated horn & Nautilus-Stainless steel Radiator guard-Givi wing rack-OEM screen-Yammy touring screen-MRA Vario-MRA Double bubble cut down for fast as fk riding-Tiger screen-Tank protector-Stomp grip panels-Optimate lead   Gone to Heaven  :sorry: 

 

1991 MK1 in need of some TLC watch this space   :) Sorted and on the Road Mick  :P  :P it's the bike that Jack built  ;) Gone to Heaven  :wub: 

 


#58 Studley Ramrod

Studley Ramrod

    Monkey Boys Monkey

  • Root Admin(A)
  • PipPipPipPipPipPipPipPip
  • 19,270 posts
  • Location:HELLO ! I'm in the Library...Notts
  • TDM model: 1993

Posted 17 December 2020 - 07:10 pm

5w ?  Is that a typo Dabs ?  How much weight have you lost mate ? :huh:


Mk2a 2000 in Silver. Top end Refurb @ 41100 miles, Scottoiler, Renthal Road High Bars, Up & Back Bar Risers, Bellypan, DL650 Handguards, Capt. Picard Bar Ends, House of Henty SS Wheel spacers, New Seat Cover Fitted. 58 MPG !!  Now owned by chrisbee !   Studley's mk2a Bloggerydoodaah !  Photos of my first MK1  Photos of my MK2a  TPLQHCSRSFC No. 1 Fan


#59 Sphere

Sphere

    really likes Carpe

  • Member
  • 81 posts
  • TDM model: 2003

Posted 17 December 2020 - 09:11 pm

Thanks for the guidance chaps, I'll go with the std 10wt and see how it feels.

 

I'm not that 'well built' but expect to add a few lbs, consuming cake while fettling. :cake eating:


The best thing about being old is we did all our stupid stuff before the Internet was invented, so there’s no proof.


#60 steve27bha

steve27bha

    needs a 2nd hobby

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPip
  • 788 posts
  • Location:West Lothian
  • TDM model: 2008

Posted 17 December 2020 - 11:24 pm

Be aware that there is no standard for "weight" in fork oils, and different brands' "10W" can vary considerably.

 

Go see this item and the table and comments at the end:- http://www.mototribo...pension-fluids/

 

To compare different weights you should do so within a single brand according to that. Other similar tables are available.


TDM900A 2008/09 in use, with     gallery_179098_391_770.jpg sml_gallery_179098_391_1145.jpg  gallery_179098_391_1206.jpg gallery_179098_391_253.jpg gallery_179098_391_82.jpg gallery_179098_391_725.gif gallery_179098_391_797.jpg gallery_179098_391_1396.jpg gallery_179098_391_501.jpg gallery_179098_391_316.jpg  gallery_179098_391_1768.jpg gallery_179098_391_106.jpggallery_179098_391_2170.jpg gallery_179098_391_1373.jpg

 

CBX750FE in reserve; Cagiva N90 125 now rebuilt & in use.



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users