QUOTE(wicklamulla @ Tue 3rd Jul 2007, 10:36 AM) <{POST_SNAPBACK}>
really ?? thats handy to know.
Agreed - is it a solid fact?
Checking oil level
Started by
Jez
, Aug 29 2006 06:52 pm
84 replies to this topic
#41
Pict
-
- Member
-
- 6,257 posts
Keep on keepin' on
- Location:North Herts., UK
- TDM model: 2006
Posted 03 July 2007 - 10:49 am
Agreed - is it a solid fact?
"It's a TDM, Jim, but not as we know it"
www.youtube.com/watch?v=RAHmEWim3to
Diamond black TDM 900A TRIKE, 2006 ABS model converted by Trike Design (Caerphilly, South Wales) prior to first registration in March 2007.
#42
Ormet
-
- Members
- 8 posts
arrived on last train
- Location:Dals Långed, Sweden
- TDM model: 2000
Posted 03 July 2007 - 02:47 pm
QUOTE(Galilee @ Tue 3rd Jul 2007, 12:08 PM) <{POST_SNAPBACK}>
I bet there's a dash missing in there. It should read 1-5 minutes. As in; Minimum one, max 5 minutes.
Hayes manual says about 2 minutes, doesn't it?
Hayes manual says about 2 minutes, doesn't it?
Hmm, I did not wrote that. But cortez did...
#43
Galilee
-
- Member
-
- 892 posts
850 going for 900
- Location:Norway
- TDM model: 1996
Posted 03 July 2007 - 08:51 pm
QUOTE(Ormet @ Tue 3rd Jul 2007, 04:32 PM) <{POST_SNAPBACK}>
Hmm, I did not wrote that. But cortez did...
Just checked, Hayes just says 'to running temperature'when checking level, and to run it for 2 mins then stop for 10 sec. before checking oil level after oil change
Either way 15 minutes idling is probably a bit more than needed.
Edited by Galilee, 03 July 2007 - 08:53 pm.
Too Freud to rock'n'roll, too Jung to die.
#44
robelst
-
- Supporting Member(thanks)
-
- 1,844 posts
has been here 4ever
- Location:Cotswolds
- TDM model: no more
Posted 03 July 2007 - 09:29 pm
QUOTE(cortez @ Tue 3rd Jul 2007, 02:00 AM) <{POST_SNAPBACK}>
Interesting that the 900 can't be started if the level is too low, comforting too.
Pah, that's nothing: The superior 850 automatically stops running when the oil-level gets too low
Idle: I suppose the oil must be pumped round quite quickly, but again I noticed the oil level drop when doing that when the bike is on the side stand: I suspect leaning the bike to the left will leave a part of the oil out of reach from the pumps that sit on the right side.
That was not a banana, Dougal
#45
tzolea
-
- Member
- 43 posts
seems to like Carpe
- Location:Romania
- TDM model: 1997
Posted 28 September 2007 - 12:15 pm
Yahoo ID: tdmist
Email: tzolea@yahoo.com
next stop... somewhere on the map!
If you pass by Campulung Muscel city in Romania, I am glad to offer you a place to sleep, to eat, to take a hot bath, to put your tent and tools for repairing or maintaining your bike.
Yamaha TDM 850 '97
Yamaha YZF 600 R Thundercat '97
Yamaha XT 600 '97
Yamaha FZR 600 '91
Yamaha FZ 250 '85
MZ 250 '84
Jawa 125cc '60
Email: tzolea@yahoo.com
next stop... somewhere on the map!
If you pass by Campulung Muscel city in Romania, I am glad to offer you a place to sleep, to eat, to take a hot bath, to put your tent and tools for repairing or maintaining your bike.
Yamaha TDM 850 '97
#46
dapleb
-
- Root Admin(A)
-
- 18,198 posts
Monkey Boy
- Location:The home of morris dancin
- TDM model: 1990
Posted 28 September 2007 - 12:28 pm
QUOTE(Galilee @ Tue 3rd Jul 2007, 11:08 AM) <{POST_SNAPBACK}>
I bet there's a dash missing in there. It should read 1-5 minutes. As in; Minimum one, max 5 minutes.
Nope, if you do that you will overfill.
"Whats up", "Piston Broke", "Yeah me too...hic"
If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117
Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.
Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.
If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117
Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.
Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.
#47
starkmojo
-
- Member
- 51 posts
enuff posts to fill a 50cc
- Location:Portland or USA
- TDM model: 1993
Posted 31 May 2012 - 02:06 pm
so anyone know what amount of oil to add if the dipstick is just at the "add" line? Mine isnt there yet but I am racking up the miles and it is a little low- 3/4s of the way between full and add. I would hate to overfill at some truck stop after all.
1993 TDM MK 1 850 D (US 49 state model)
Duncan
1993 TDM MK 1 850 D (US 49 state model)
Duncan
Edited by starkmojo, 31 May 2012 - 02:07 pm.
#48
matttdm99
-
- Member
-
- 227 posts
Carpe groupie
- Location:southampton uk
- TDM model: 1999
Posted 31 May 2012 - 02:56 pm
My bike used oil when I got it I changed it for some high end stuff we use in Honda's and I have done 2000 miles and its stayed the same :-)
#49
dablik
-
- Supporting Member(thanks)
-
- 10,817 posts
Master Intermediate Fettlin' Award 2018
- Location:Bootleshire
- TDM model: 1992
Posted 15 July 2012 - 02:35 pm
It's so long since i checked me oil level 
cant remember if the dipstick should be in for the Niner........ 
cant remember if the dipstick should be in for the Niner........
Bigred mk1 R1 Calipers- Braided lines- Givi wing rack-Crash bungs- Hi vis bullets-PR2's- and a hoot to ride.
Quad 900 Silver Laser duo tech pipes-Scott oiler-Engine crash bars- Radiator mounted see me ring LED's-Datatool system 3 alarm -Centre stand- Extender fender-Renthal bars-Handle bar risers-Mirror extenders-BMW GS Handgaurds-Acumen uprated horn & Nautilus-Stainless steel Radiator guard-Givi wing rack-OEM screen-Yammy touring screen-MRA Vario-MRA Double bubble cut down for fast as fk riding-Tiger screen-Tank protector-Stomp grip panels-Optimate lead Gone to Heaven 
1991 MK1 in need of some TLC watch this space Gone to Heaven 
Sorted and on the Road Mick 
it's the bike that Jack built 
#50
chrisr
-
- Supporting Member(thanks)
-
- 1,762 posts
has been here 4ever
- Location:Surbiton, Surrey
- TDM model: 2010
Posted 15 July 2012 - 08:15 pm
QUOTE(dablik @ Sun 15th Jul 2012, 03:35 PM) <{POST_SNAPBACK}>
It's so long since i checked me oil level cant remember if the dipstick should be in for the Niner........
cant remember if the dipstick should be in for the Niner........ Don't screw it in and there's an arrow on the cap that points up.
The Blue One : 2004 model owned 2010-2018 much loved, much missed and now living with a man in Scotland Spain.
The Black One : 2010 Model Registered 2013 owned 2018 - present .Beowulf Cans. Renthal 755s Grip Puppies,15w fork oil,DL650 handguards ,givi engine bars ,led spotlights,gipro gear indicator, shortened dogbones, LeeHenty CSM kit and stainless bits, Topsellerie seat,MRA Xcreen,.PC III (dynoed). K&N airfilter,Fenda extenda. Lots of stainless/titanium.
#51
dablik
-
- Supporting Member(thanks)
-
- 10,817 posts
Master Intermediate Fettlin' Award 2018
- Location:Bootleshire
- TDM model: 1992
Posted 15 July 2012 - 08:34 pm
Many thanks Chris 
Bigred mk1 R1 Calipers- Braided lines- Givi wing rack-Crash bungs- Hi vis bullets-PR2's- and a hoot to ride.
Quad 900 Silver Laser duo tech pipes-Scott oiler-Engine crash bars- Radiator mounted see me ring LED's-Datatool system 3 alarm -Centre stand- Extender fender-Renthal bars-Handle bar risers-Mirror extenders-BMW GS Handgaurds-Acumen uprated horn & Nautilus-Stainless steel Radiator guard-Givi wing rack-OEM screen-Yammy touring screen-MRA Vario-MRA Double bubble cut down for fast as fk riding-Tiger screen-Tank protector-Stomp grip panels-Optimate lead Gone to Heaven
1991 MK1 in need of some TLC watch this space Gone to Heaven Sorted and on the Road Mick it's the bike that Jack built
#52
Dannyboy
-
- Member
-
- 609 posts
Knight of Postsalot
- Location:Staffs
- TDM model: 1993
Posted 03 January 2013 - 08:41 pm
When changing oil and filter on a 3vd how much oil does it usualy need?
Mk1' R1 gold spot front calipers • HH sintered front pads • FJR1300 front master cylinder • K&N air filter • Factory Pro emulsion tubes • Oxford heated grips • Mirror extenders • KTM handguards • Baglux tank cover and bag. 12v auxiliary socket • Delkevic 2 into 1 exhaust system • Engine guards • Chrome radiator guard • Renthal bars • Touring screen. Optimate and Oil pressure switch/light mod (Leehenty special!) to be fitted. Tom Tom rider V2 europe. GoPro HD Hero. Fenda extender.
Triumph Tiger 955i with stuff added.
#53
dapleb
-
- Root Admin(A)
-
- 18,198 posts
Monkey Boy
- Location:The home of morris dancin
- TDM model: 1990
Posted 03 January 2013 - 09:05 pm
Book says 3.9 litres. Did mine yesterday and after squeezing it was mayhaps a touch more. Oid put 3.8 in and then run it warm and recheck.
I know you will know this already Danny but 2 drain plugs and if feeling particularly frisky loosen the gallery bolt to get rid of a thimble full of old oil and check all is pumping as it should.
Jobs a carrot.
I know you will know this already Danny but 2 drain plugs and if feeling particularly frisky loosen the gallery bolt to get rid of a thimble full of old oil and check all is pumping as it should.
Jobs a carrot.
"Whats up", "Piston Broke", "Yeah me too...hic"
If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117
Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.
Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.
If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117
Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.
Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.
#54
TYREDNGRUMPEE
-
- Member
-
- 1,627 posts
has been here 4ever
- TDM model: 1998
Posted 03 January 2013 - 09:16 pm
More like 3.5 at first. You don't want 0.5 on the garage floor, I know!Oid put 3.8 in and then run it warm and recheck.
#55
dapleb
-
- Root Admin(A)
-
- 18,198 posts
Monkey Boy
- Location:The home of morris dancin
- TDM model: 1990
Posted 03 January 2013 - 09:22 pm
No sense of adventure grumps.
I am sure the mkII worksop manuel suggests 3.6 or something then run for 1min? then put the rest in. Don't say that in the mkI Worksop Manuel but can't see that there any diff atwix the two enjuns that would warrant a diff method. Wonder why they changed it, complaints aboot oil on garage floor
?
I am sure the mkII worksop manuel suggests 3.6 or something then run for 1min? then put the rest in. Don't say that in the mkI Worksop Manuel but can't see that there any diff atwix the two enjuns that would warrant a diff method. Wonder why they changed it, complaints aboot oil on garage floor
?
"Whats up", "Piston Broke", "Yeah me too...hic"
If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117
Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.
Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.
If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117
Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.
Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.
#56
Dannyboy
-
- Member
-
- 609 posts
Knight of Postsalot
- Location:Staffs
- TDM model: 1993
Posted 03 January 2013 - 09:42 pm
Looks like Halfrauds 10w 40 semi synth 4 litre then. Cheers all.
Mk1' R1 gold spot front calipers • HH sintered front pads • FJR1300 front master cylinder • K&N air filter • Factory Pro emulsion tubes • Oxford heated grips • Mirror extenders • KTM handguards • Baglux tank cover and bag. 12v auxiliary socket • Delkevic 2 into 1 exhaust system • Engine guards • Chrome radiator guard • Renthal bars • Touring screen. Optimate and Oil pressure switch/light mod (Leehenty special!) to be fitted. Tom Tom rider V2 europe. GoPro HD Hero. Fenda extender.
Triumph Tiger 955i with stuff added.
#57
Studley Ramrod
-
- Root Admin(A)
-
- 19,272 posts
Monkey Boys Monkey
- Location:HELLO ! I'm in the Library...Notts
- TDM model: 1993
Posted 04 January 2013 - 10:41 am
Halfrauds also do the filter fer norra lorrra lolly. Last time I bought wan it was cheaper to buy the filter from the car filter section than the bike filter section.
Last time I bought wan it was cheaper to buy the filter from the car filter section than the bike filter section.
Mk2a 2000 in Silver. Top end Refurb @ 41100 miles, Scottoiler, Renthal Road High Bars, Up & Back Bar Risers, Bellypan, DL650 Handguards, Capt. Picard Bar Ends, House of Henty SS Wheel spacers, New Seat Cover Fitted. 58 MPG !! Now owned by chrisbee ! Studley's mk2a Bloggerydoodaah ! Photos of my first MK1 Photos of my MK2a TPLQHCSRSFC No. 1 Fan
#58
dapleb
-
- Root Admin(A)
-
- 18,198 posts
Monkey Boy
- Location:The home of morris dancin
- TDM model: 1990
Posted 04 January 2013 - 03:00 pm
Bugger last time I thougth they'd gone up a squiddler.....mayhaps I just picked from wrong shelf!!!!
"Whats up", "Piston Broke", "Yeah me too...hic"
If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117
Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.
Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.
If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117
Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.
Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.
#59
Studley Ramrod
-
- Root Admin(A)
-
- 19,272 posts
Monkey Boys Monkey
- Location:HELLO ! I'm in the Library...Notts
- TDM model: 1993
Posted 04 January 2013 - 03:13 pm
Quite possible ! Blatant rip off fer bikers eh ! 
Mk2a 2000 in Silver. Top end Refurb @ 41100 miles, Scottoiler, Renthal Road High Bars, Up & Back Bar Risers, Bellypan, DL650 Handguards, Capt. Picard Bar Ends, House of Henty SS Wheel spacers, New Seat Cover Fitted. 58 MPG !! Now owned by chrisbee ! Studley's mk2a Bloggerydoodaah ! Photos of my first MK1 Photos of my MK2a TPLQHCSRSFC No. 1 Fan
#60
Dannyboy
-
- Member
-
- 609 posts
Knight of Postsalot
- Location:Staffs
- TDM model: 1993
Posted 05 January 2013 - 10:51 am
Quite possible ! Blatant rip off fer bikers eh !
How's the filter listed, by part no or by bike.
Mk1' R1 gold spot front calipers • HH sintered front pads • FJR1300 front master cylinder • K&N air filter • Factory Pro emulsion tubes • Oxford heated grips • Mirror extenders • KTM handguards • Baglux tank cover and bag. 12v auxiliary socket • Delkevic 2 into 1 exhaust system • Engine guards • Chrome radiator guard • Renthal bars • Touring screen. Optimate and Oil pressure switch/light mod (Leehenty special!) to be fitted. Tom Tom rider V2 europe. GoPro HD Hero. Fenda extender.
Triumph Tiger 955i with stuff added.
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users
